Alliance Laundry Systems SF18VNV - Manual (Page 39)

37
Maintenance
F232060 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
• Discolorations or heat tint from
overheating may be removed by scouring
with a powder or by employing special
chemical solutions.
• Sanitizers or sterilizing solutions should
not be left in stainless steel equipment for
prolonged periods of time. They often
contain chlorine, which may cause
corrosion. The stainless steel should be
cleaned and rinsed thoroughly of any
solution containing chlorine.
• When an external chemical supply system
is used, make certain that no siphoning of
chemicals occurs when the washer-
extractor is not in use. Highly concentrated
chemicals can cause severe damage to
stainless steel and other components
within the machine. Damage of this kind is
not covered by the manufacturer’s
warranty. Locate the pump below the
washer-extractor’s injection point to
prevent siphoning of chemicals
into the machine.