Panasonic KXTG7873 - Manual (Page 16)

Initial settings
n Direct command code:
Programmable settings can be accessed by
pressing MMENUN, #, and then the
corresponding code on the dial keypad
(page 36).
Example: Press MMENUN#101.
n
Symbol meaning:
Example: MbN: “Off”
Press MCN or MDN to select the words in
quotations.
Date and time
Important:
R When you install the batteries for the first
time, the handset may prompt you to set
date and time. First press MSELECTN, then
proceed to step 2.
Handset
1
MMENUN#101
2
Enter the current month, date, and year
by selecting 2 digits for each.
Example: July 15, 2013
07 15 13
3
MOKN
4 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
09 30
5
*: Select “AM” or “PM”.
6
MSAVEN a MOFFN
Note:
R When English is selected as the display
language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock
format is used.
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Display language
You can select either “English” or
“Español” as the display language. The
default setting is “English”.
Handset / Base unit
1
MMENUN#110
2
MbN: Select the desired setting. a
MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Voice guidance language
You can select either “English” or
“Español” as the voice guidance language
of the answering system. The default setting is
“English”.
Handset
1
MMENUN#112
2
MbN: Select the desired setting.
3
MSAVEN a MOFFN
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
Handset
1 MMENUN#120
2
MbN: Select the desired setting.
3
MSAVEN a MOFFN
16 For assistance, please visit http://www.panasonic.com/help
Getting Started
TG78xx(en)_1210_ver101.pdf 16 2012/12/10 21:19:25