Panasonic KXTG7873 - Manual (Page 46)

Handset
n When a cellular phone is paired:
1
MCN CID
2 MbN: Select the entry to be blocked. a
MSELECTN
R To edit the number, press *
repeatedly until the phone number
is shown in the 10-digit format.
3 MSAVEN
4
MbN: “Call block” a MSELECTN
5
MbN: “Yes” a MSELECTN
6
Edit the phone number if necessary
(24 digits max.).
7
MSAVEN a MOFFN
n When a cellular phone is not paired:
1
MCN CID
2
MbN: Select the entry to be blocked.
R To edit the number: MMENUN a
MbN: “Edit” a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the
10-digit format. And then, press
MSAVEN. Go to step 5.
3
MMENUN
4
MbN: “Save CID” a MSELECTN
5
MbN: “Call block” a MSELECTN
6 MbN: “Yes” a MSELECTN
7
Edit the phone number if necessary
(24 digits max.).
8
MSAVEN a MOFFN
Base unit
1
MCIDN
2
MbN: Select the entry to be blocked.
R To edit the number, press MEDITN
repeatedly until the phone number is
shown in the 10-digit format.
3 MSAVEN
4
MbN: “Call block” a MSELECTN
5
MbN: “Yes” a MSELECTN
6
Edit the phone number if necessary (24
digits max.).
7 MSAVEN a MEXITN
n By entering phone numbers:
Handset
1
MMENUN#217
2
MMENUN a MbN: “Add” a MSELECTN
3
Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
4
MSAVEN a MOFFN
Base unit
1 MMENUN#217 a MADDN
2
Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
3
MSAVEN a MEXITN
Blocking incoming calls without
phone number
You can reject a call when no phone number
is provided, such as a call just showing “Out
of area”.
Handset / Base unit
1
MMENUN#240
2 MbN: Select the desired setting. a
MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R When the unit receives a cellular call
without a phone number, the call may not
be rejected.
Setting the first ring for the call block
list
Handset / Base unit
If you do not want the first ring from a number
on the call block list to sound, turn the first ring
setting to “Off”. The default setting is “On”.
1
MMENUN#173
2
MbN: Select the desired setting. a
MSAVEN
46 For assistance, please visit http://www.panasonic.com/help
Programming
TG78xx(en)_1210_ver101.pdf 46 2012/12/10 21:19:29