Panasonic TYFB9TU - Manual (Page 9)

9
English
Select the picture mode.
Note
Select “CINEMA” when the side bars (the gray bands on the both sides of
4:3 picture) flash (alternate gray/white).
Adjust the color intensity.
Adjust natural flesh tones.
Adjust the brightness in dark areas of picture.
Adjust white balance of picture.
Adjust clarity of outline detail.
Reset all the picture adjustments to factory preset.
1
Press [ACTION] to display the menu screen.
2
Press [ , ] to select the menu icon, and press [ , ] to select
the submenu.
To select the submenus not displayed, select “OTHER ADJ.” and press [ ].
3
Press [ , ] to change the settings or enter the option menu.
Changing the initial settings
You can change the settings to suit your preferences and to suit the unit to the environment in which it is being used.
Then you can clone the setting and switch to the “HOTEL” mode so the guest users can access the particular settings
only (see page 14).
To return to the previous screen
Press [ACTION].
To exit the menu screen
Press [ ] while highlighting a menu icon.
Note
This feature does not work for the sub picture of the display’s “MULTI PIP” function.
POWER
MUTE
ASPECT
SAP
R-TUNE
RECALL
ACTION
CH
CH
VOL VOL
INPUT TV/VIDEO
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ. VIVID
: EXIT : SUB MENU
SET
Submenu
Menu icon
Option menu
AUDIO menu
MODE (see page 7)
BASS
TREBLE
BALANCE
NORMAL STEREO / SAP / MONO
Adjust the bass response.
Adjust the treble response.
Adjust the left (
)/ right ( )speaker volume balance.
Reset BASS, TREBLE and BALANCE adjustments to factory preset.
PICTURE menu
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
COLOR TEMP
(Color temperature)
3D Y/C FILTER
STANDARD CINEMA VIVID AUTO
NORMAL WARM (Increases red) COOL (Increases blue)
ON (Minimize noise and cross color in the picture) OFF