Using the features – AT&T 8110 User Manual

Page 23

Advertising
background image

FIGURE 11 Removing the Auto Answer button; Inseting the Button Slot Cover

Using the Features

The procedures which follow give short, step-by-step instructions for
using each feature. For your convenience, features are listed
alphabetically.

Note: At the end of this booklet is a one-page Quick Reference Guide
which allows you quick access to procedures for many of the telephone
features. You can remove this page from the manual (tear along the
perforation), and keep it near your telephone.

Important: If your telephone does not respond to any button presses or
if it sounds dead, refer to the procedures in Appendix D.

Using the Handset and Speakerphone

For most features you must lift the handset (go off-hook) before you can
use a feature. However, if you are using an 8110 telephone, you may
choose to leave your handset (on-hook, that is, leave the handset on the
telephone cradle) and use your built-in speakerphone instead.

Note: The 8102 telephone has an Adjunct jack on the rear of the
telephone so that you can use an externally added speakerphone, such

as the AT&T S201A Speakerphone.

Answering and Placing a Call

To answer a call

1

Pick up handset

2

Speak to other party

To answer a call using the speakerphone (for 8110 users)

1

When you hear the telephone ring, press [

Spkr

]

Red light next to [

Spkr

] goes on

2

Speak to other party

To place a call

1

Pick up handset

[dial tone]

2

Dial desired number

20

21

Advertising
This manual is related to the following products: