Panasonic RP-BTGS10-K - Manual (Page 16)

VQT5C48
16
16
About Bluetooth ®
Panasonic bears no responsibility for data and/or information that is
compromised during a wireless transmission.
■
Frequency band used
This unit uses the 2.4 GHz frequency band.
■
Certification of this unit
• This unit conforms to frequency restrictions and has received
certification based on frequency laws. Thus, a wireless permit is not
necessary.
• The actions below are punishable by law in some countries:
– Taking apart/modifying the unit.
– Removing specification indications.
■
Restrictions of use
• Wireless transmission and/or usage with all Bluetooth ® equipped
devices is not guaranteed.
• All devices must conform to standards set by Bluetooth SIG, Inc.
• Depending on the specifications and settings of a device, it can fail to
connect or some operations can be different.
• This system supports Bluetooth ® security features. But depending on
the operating environment and/or settings, this security is possibly not
sufficient. Transmit data wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth ® device.
■
Range of use
Use this unit at a maximum range of 10 m (33 feet).
The range can decrease depending on the environment, obstacles or
interference.
■
Interference from other devices
• This unit may not function properly and troubles such as noise and
sound jumps may arise due to radio wave interference if this unit is
located too close to other Bluetooth
® devices or the devices that use the
2.4 GHz band.
• This unit may not function properly if radio waves from a nearby
broadcasting station, etc. is too strong.
■
Intended usage
• This unit is for normal, general use only.
• Do not use this system near an equipment or in an environment that is
sensitive to radio frequency interference (example: airports, hospitals,
laboratories, etc).