Panasonic RP-BTGS10-K - Manual (Page 8)

VQT5C48
8
8
Connecting a Bluetooth ® device
To establish a wireless connection, register the headset with Bluetooth ®
compatible devices.
Power on for the first time
1
Turn on the headset
• The headset will start searching
for the Bluetooth ® device to
connect to, and the LED on
the top will blink in blue and
magenta alternately. (Only one
operation after purchase)
2
When the headset
(“RP-BTGS10”) is detected
by the Bluetooth
® device,
register and connect to it
• If prompted for a passkey,
input “0000 (four zeros)”.
• If the Bluetooth ® profile
selection screen appears,
select the “A2DP” profile. If
“A2DP” is not supported or if
you want to just use phone
calls, select the “HFP” or
“HSP” profile. (For details
on profiles, see “Listening to
music” (P. 10) and “Making a
phone call” (P. 12))
3
Check the connection with
the Bluetooth
® device on
the headset
• When the connection has
been established, the LED
on the top will emit blue light
approximately every 3 seconds.
One short beep will sound.
Connection after the second
time
<Connect the same Bluetooth ®
device>
When the headset is turned on, it
will search for the previously setup
Bluetooth
® device and automatically
start connecting to it. The LED on
the top of the headset will blink
in blue until the connection is
established.
<Connect a different Bluetooth ®
device>
Turn on the headset. Press and
hold the pairing button for
approximately 2 seconds. The
headset will start searching for
other Bluetooth
® device, and the
LED on the top will blink in blue and
magenta alternately. A two-tone
beep will sound.
Continue to steps
2 and 3 on the left.
Preparation on the Bluetooth ® device
• Turn on the power, and enable the Bluetooth ® feature.
• Place the device within 1 m (3.3 feet) from the headset.
• Check the device operation in its operation instructions, as required.
■
Note
• If connection to a device is not
established within 5 minutes, the
headset will be turned off. Start
from step
1 again.
• 2 or more Bluetooth ® devices
cannot be connected to the
headset at the same time.
• You can pair up to 8 devices with this
headset. If a 9th device is paired, the
device with the oldest connection will
be replaced. To use it, pair it again.