Compensating the exposure, P138), Rotate the control dial to compensate the exposure – Panasonic DMC-GF6KK User Manual
Page 138
138
Recording
Compensating the Exposure
Applicable modes:
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.
•
Select [0] to return to the original exposure.
•
Rotate the control dial to display the [Expo.Meter].
•
To compensate the exposure using the function lever, set [Function Lever]
in the
[Custom] menu to [EXP.].
•
The set exposure value is memorized even if the camera is turned off.
•
When numerical values for aperture and shutter speed are displayed in Program AE Mode,
each press of the cursor button
3 switches between Program Shift and Exposure
Compensation.
•
In Aperture-Priority AE Mode, each press of the cursor button
3 switches between Aperture
Setting
and Exposure Compensation.
•
In Shutter-Priority AE Mode, each press of the cursor button
3 switches between Shutter
and Exposure Compensation.
Not available in these cases:
•
The compensation range of the exposure will be limited depending on the brightness of the
subject.
1
Press
3 (È) to switch to Exposure
Compensation operation.
2
Rotate the control dial to compensate the
exposure.
A Exposure Compensation value
B [Expo.Meter]
Underexposed
Properly
exposed
Overexposed
Compensate the exposure
towards positive.
Compensate the exposure
towards negative.
98
98
98
16
0
SS
SS
F
250
15
4.0
5.6
8.0
30
60
125
-3
-3
-3
-3
0
0 ＋3
＋
3
-3
-3
0
0 ＋3
＋
3
60
3.5
B
A