Panasonic DMC-GF6KK - Manual (Page 309)

309
Others
• Picture might look whitish when lens or image sensor gets dirty with fingerprints or similar.
> If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft, dry
cloth.
> Refer to
P326 when the image sensor gets dirty.
> Check that the exposure is correctly compensated. (P138)
• Is the AE Lock (P161) applied incorrectly?
> Cancel the settings of White Balance Bracket (P146) .
• Is the Burst (P164) or Auto Bracket (P167) set?
> Set the drive mode to Single. (P58)
• Is the self-timer (P170) set to [ ]?
• The subject is beyond the focus range of the camera. (P59)
• There is camera shake (jitter) or the subject is moving slightly. (P122)
• Is [Focus/Release Priority] in the [Custom] menu set to [RELEASE]? (P156)
In this case, the picture may not be properly focused even if [AFS], [AFF] or [AFC] in [Focus
Mode] is set.
• Is the AF Lock (P161) applied incorrectly?
The recorded picture is whitish.
The recorded picture is too bright or dark.
Multiple pictures are taken at one time.
The subject is not focused properly.