Panasonic DMC-GF6KK - Manual (Page 165)

165
Recording
• The Burst Mode speed may become slower depending on the following settings.
– [Picture Size] (P174) /[Quality] (P175) /[Sensitivity] (P140) /[Focus Mode] (P148) /
[Focus/Release Priority] (P156)
• Burst speed can also be set with [Burst Rate] in the [Rec] menu.
• Refer to P175 for information about RAW files.
4
Focus on the subject and take a picture.
• Hold down the shutter button fully to activate the Burst
Mode.
∫ Canceling the Burst Mode
Select [ ] (single picture recording) or [ ] from among the drive modes.
(P163)
Focusing in Burst Mode
The focus changes depending on the setting for [Focus/Release Priority] (P156) in the
[Custom] menu and the setting for [Focus Mode] (P148) in the [Rec] menu.
¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first
picture.
¢2 The burst speed may become slower because the camera is continuously focusing on the
subject.
¢3 Burst speed takes priority, and focus is estimated within possible range.
Focus Mode
Focus/Release
Priority
Focus
AFS
[FOCUS]
At the first picture
[RELEASE]
AFF/AFC ¢1
[FOCUS] Normal focusing ¢2
[RELEASE] Predicted focusing ¢3
MF — Focus set with Manual Focus
AFS AFS
60 i H L
4:3