Auerswald 2500 - Manual (Page 104)

Use of the Telephone and PBX System
Subscriber Function of the PBX
104
Deactivate Do-not-Disturb for certain Persons (Call Deblocker – inbound)
If you like to be reachable for certain persons with the activated “Do-not-Disturb”, it will be
possible to enter their external telephone number into a list with the PC software of the PBX.
This list is valid for all subscribers and you are able to activate or deactivate it for your tele-
phone if necessary. The presentation of the caller telephone number is necessary for the
PBX to recognize the caller.
Use the Function via Function Menu:
Assign Key:
Use Function via Key:
By pressing the key the Call Deblocker is switched on, off or over.
LED Signalling next to the Key:
Open the function menu for the function “Call
Deblocker” (You will find help on
page 33 and
the following).
functions
Call Deblocker
The icon marks the current
setting.
Press the softkey to the left of the option
you require:
ț activating: Switch on the Call Deblocker.
ț switching off: Switch off the Call Deblocker.
...
Open the key programming menu for the func-
tion “Call Deblocker” (You will find help on
page 33 and the following).
define keys
function key ...
... level
Call Deblocker
The current settings for the key
assignment is shown on the
display.
If you like to change the current settings, press
the softkey in front of the corresponding
selection once or several times (You will find
help on
page 155 and the following):
ț [switching type]: Enables the assignment
with switch on, off or over.
Press the softkey to complete the settings.
green The Call Deblocker is switched on.
off The Call Deblocker is switched off.