Auerswald 2500 - Manual (Page 108)

Use of the Telephone and PBX System
Subscriber Function of the PBX
108
Assign Key:
Use Function via Key:
By pressing the key the Subscriber Call Forwarding is switched on, off or over to the config-
ured target.
Exception: A key assigned with “deactivate all” deletes only the currently switched on Call
Forwardings.
LED Signalling near the Key (not in case of “Delete all”):
Open the key programming menu for the func-
tion “Call forwarding subscriber” (You will find
help on
page 33 and the following).
define keys
function key ...
... level
Call fwd.: scr
Use the and softkeys to browse to the
option you require and press the softkey to
the left of the option:
ț deactivate all: Assign the key with the func-
tion “deactivate all”.
(no additional entry is necessary)
ț unconditional: Assign the key with the func-
tion “Subscriber Call Forwarding uncondi-
tional”.
ț on busy: Assign the key with the function
“Subscriber Call Forwarding on busy”.
ț on no reply: Assign the key with the function
“Subscriber Call Forwarding on no reply”.
...
The current settings for the key
assignment is shown on the
display.
If you like to change the current settings, press
the softkey in front of the corresponding
selection once or several times (You will find
help on
page 155 and the following):
ț [telephone number]: Allows to enter a tar-
get telephone number.
ț [name]: Allows to enter a name for the tar-
get.
ț [switching type]: Enables the assignment
with switch on, off or over.
Press the softkey to complete the settings.
red The Subscriber Call Forwarding is switched on to the configured target.
yellow The Subscriber Call Forwarding is switched on to another configured target.
off The Subscriber Call Forwarding is switched off.