Agilent Technologies N9360A - Manual (Page 21)

GSM System 4
N9360A Multi UE Tester Quick Reference Guide 4-3
For Pinpointing Failures
Figure 4-2 [Automatic Test: Stand-by] Screen
1 Perform the steps described in “For Go/No-Go Testing.”
2 Press the Screen>> softkey to set screen mode to Detail or
Value.
Table 4-2 GSM Automatic test sequence
Step Action needed
Location Update Wait until the Location Update is complete.
MS Call Dial an arbitrary number and press the Off Hook key
on the mobile phone.
Talk Talk to the mobile phone to judge its loop back sound
quality and press the Pass or Fail softkey.
RF Test Wait until the RF test is complete.
MS Release Finish the call from the mobile phone.
BS Call Respond to the call on the mobile phone.
BS Release Wait until the call is finished from the Tester.