Agilent Technologies N9360A - Manual (Page 39)

cdma2000 System 6
N9360A Multi UE Tester Quick Reference Guide 6-5
For Troubleshooting
Figure 6-3 [Manual Test (MC-1x): Stand-by] Screen
1 Press the Manual Test softkey on the [Initial] screen.
2 Move the cursor to the "Procedure" field and select a
pre-defined test procedure.
3 Set the Service Option field to 32.
4 Turn the mobile phone on.
5 Wait for the completion of Location Update.
6 Press the BS Call softkey.
7 While "Connection" is highlighted in the test flow, press the
Trigger
softkey to start single measurement or the Trigger
Sing/Cont softkey to start continuous measurement. Press the
Trigger Sing/Cont softkey again to terminate continuous
measurement.
8 Press the Release softkey to finish the test.