AT&T E5812B - Manual (Page 49)

46
ɇŽŽƒŒ‚‡–
There is no dial
tone ƨ ‡‘’Ɛ’—ŠŠ’†ƒ€”ƒ‘“ ƒ‘’‡Œ‘Ɠ
ƨ ”ƒ’†ƒ‚Šƒ‘‘†Œ‚‘ƒ’Š‘ƒ’’†ƒ’ƒŠƒŽ†Œƒ€‘ƒƓ
It might be out of range.
ƨ †ƒ ’ƒŠƒŽ†Œƒ Š‡Œƒ ‚ ‹‡ †’ €ƒ ‹Š„“Œ’‡Œ‡Œ Ɠ —
installing a new telephone line cord.
ƨ ‡‘ŒŒƒ’ ’†ƒ ’ƒŠƒŽ†Œƒ €‘ƒ „‹ ’†ƒ ’ƒŠƒŽ†Œƒ ˆ‰
and connect a different telephone. If there is no dial tone
on the telephone either, the problem is in your wiring or
local service. Contact your local telephone company.
The telephone
does not ring
when there is
an incoming
call ƨ ‰ƒ‘“ƒ’†ƒ‡Œ ƒ‡‘ŒƪŽ ƒ‘ǍǎƕǍǏƫƓ
ƨ ‰ƒ ‘“ƒ ’†ƒ ’ƒŠƒŽ†Œƒ Š‡Œƒ ‚ Œ‚ Ž•ƒ ‚Ž’ƒ
are plugged in properly (page 6).
ƨ †ƒ‚Šƒ‘‘†Œ‚‘ƒ’‹—€ƒ’„„‹’†ƒ’ƒŠƒŽ†Œƒ
base. Move it closer to the telephone base.
ƨ †ƒƒ‹—€ƒ’‹Œ—ƒ–’ƒŒ‘‡Œ’ƒŠƒŽ†Œƒ‘Œ’†ƒ’ƒŠƒŽ†Œƒ
line to allow all of them to ring simultaneously. Try unplugging
some of them.
ƨ
„’†ƒ’†ƒ’ƒŠƒŽ†Œƒ‘‡Œ—“†‹ƒƒ†”‡Œ ’†ƒ‘‹ƒ
problem, the problem is in the wiring or local service.
Contact the local telephone company (charges may apply).
ƨ ’†ƒƒŠƒ’Œ‡Ž‚“’‘Œ“‘ƒ‡Œ’ƒ„ƒƒŒƒ’—“
cordless telephone. Try installing your telephone as far
away as possible from the following electronic devices:
wireless routers, radios, radio towers, pager towers, cel-
lular telephones, digital telephones, intercoms, room
‹Œ‡’‘Ɛ ’ƒŠƒ”‡‘‡Œ‘Ɛ ‘Ɛ Žƒ‘ŒŠ ‹Ž“’ƒ‘Ɛ ‰‡’†ƒŒ
appliances, and other cordless telephones.
Troubleshooting
The CHARGE
light is off ƨ ŠƒŒ’†ƒ‹ƒ’ŠŠ‡† ‡Œ Œ’’‘Œ’†ƒ‚Šƒ‘‘†Œ‚-
sets and telephone base each month using a pencil eraser
or a dry non-abrasive fabric.
ƨ ‰ƒ‘“ƒ’†ƒŽ•ƒ‚Ž’ƒŒ‚’ƒŠƒŽ†ŒƒŠ‡Œƒ‚‘ƒ
plugged in correctly and securely.
ƨ ŒŽŠ“  ’†ƒ Ž•ƒ ‚Ž’ƒƓ ‡’ „ ǍǑ ‘ƒŒ‚‘ €ƒ„ƒ
plugging it back in. Allow up to one minute for the cordless
handset and telephone base to reset.
ƨ †ƒ ’ƒŠƒŽ†Œƒ ‹‡ †’ €ƒ ‹Š„“Œ’‡Œ‡Œ Ɠ Šƒ‘ƒ ƒ„ƒ ’
the Limited warranty section of this user’s manual for
further instruction.