Panasonic PT-DW7700 ENG - Manual (Page 10)

10
Name and function of parts
< When the operation mode selector is
set to Projector >
Remote control operation indicator lamp
The lamp flashes when any remote control button
is pressed.
POWER ON button (page 39)
Turns on the power if the MAIN POWER has been
put to the “l” position.
POWER OFF button (page 40)
Turns off the power if the MAIN POWER has been
put to the “l” position.
AUTO SET UP button (page 43)
Pressing this button while projecting an image
automatically corrects the picture positioning on the
screen. While the auto setup feature is active, a
message “PROGRESS...” appears on the screen.
Input selector (RGB1, RGB2, AUX, VIDEO,
S-VIDEO) button
Use to toggle through the RGB1, RGB2, AUX
(module input), VIDEO and S-VIDEO input ports.
SHUTTER button (page 48)
Press this button to black out the image
temporarily.
MENU button (page 50)
Displays and clears the Main Menu. It can also
return to the previous screen when the menu is
displayed.
FREEZE button (page 48)
Press this button to freeze the image temporarily.
Arrow buttons (page 50)
Use these buttons to select an item on the menu
screen, change setting and adjust the level.
Also use them to enter the “SECURITY” password.
ENTER button (page 50)
Press this button to enter your menu selection or to
run function.
ON SCREEN button
This button turns on and off the on-screen
indication function.
Standard (STD) button (page 50)
Press this button to restore the default factory setting.
SYSTEM SELECTOR button (page 69)
System switching can be done.
Function 1 (FUNC1) button (page 80)
This button can control the functions set in
“FUNC1” of the “Option” screen from Main Menu.
Digital Zoom (- D.ZOOM +) buttons (page 48)
Any portion of the picture can be zoomed in.
LENS button (page 41)
Switches to the mode of projection lens
adjustment.
CONTRAST button (page 52)
Switches to the mode of image contrast
adjustment.
BRIGHT button (page 52)
Switches to the mode of black level adjustment.
NEXT button
When multiple signal selectors are connected to
the main unit in the system, this button specifies
the second signal selector or beyond. With the ID
set button pressed, every press on the button will
change the value in the ten’s place.
ASPECT button
Switches the image aspect ratio to 4:3, 16:9.
Remote control
POWER ON OFF
RGB 1 RGB 2 AUX
MENU
STD
LENS
OSD 1
4
7
2
5
8
3
6
9
0 NEXT USER
LIGHT ID ALL
ASPECT
ID SET
Projector
Computer
Numetric
BRIGHT CONTRAST
ON SCREEN
SYSTEM SEL
FUNC 1
D.ZOOM
ENTER
PAGE UP
PAGE DOWN
VIDEO SHUT S- VIDEO
FREEZE
SHUTTER
AUTO
SETUP
LASER ON/OFF