Panasonic PT-DW7700 ENG - Manual (Page 96)

96
E-mail setting page (continuing)
When all entries are
complete, press the Submit
button.
To use two E-mail
addresses, enter the E-
mail address of the
destination recipient.
Select the conditions for sending E-mail.
Error:
an error is detected by self-diagnosis.
Warning LAMP1: remaining lamp service time has reached the
value set in the field on the right.
Warning LAMP2: remaining lamp service time has reached the
value set in the field on the right.
Warning input air Temperature:
temperature inside the projector has reached
the value set in the above field.
Warning output air Temperature:
exhaust temperature has reached the value
set in the above field.
Select the conditions for sending E-mail.
Error:
an error is detected by self-diagnosis.
Warning LAMP1: remaining lamp service time has reached the
value set in the field on the right.
Warning LAMP2: remaining lamp service time has reached the
value set in the field on the right.
Warning input air Temperature:
temperature inside the projector has reached
the value set in the above field.
Warning output air Temperature:
exhaust temperature has reached the value
set in the above field.
How to use network module (optional)