Panasonic PT-DW7700 ENG - Manual (Page 69)

69
How to change the system format
Pressing the SYSTEM SELECTOR button on the remote control or using the menu screen operation (page 89)
enables the user to make the following changes depending on S Video / Video input or the currently selected input
module.
The name of the selected system such as RGB, YP
B
P
R
and AUTO is displayed on the top left of the screen and
disappears automatically.
RGB signal input module : RGB RGB REALITY YP
B
P
R
Video signal input module
: AUTO1 NTSC PAL SECAM
PAL60 NTSC4.43
Serial digital input module
ET-MD95SD1 : AUTO 480i 576i
ET-MD95SD2 : AUTO 480p 480i 576i
ET-MD95SD3 : AUTO 1080/60i 1035/60i 720/60p 1080/24p
1080/24sF 1080/25p 1080/30p 1080/50i
YC b C r RGB RGB REALITY
: AUTO2 NTSC PAL-M
PAL-N
: AUTO 480i 576i
ET-MD95RGB
ET-MD95VM2
For the setting of
AUTO2
For the setting of
ET-MD95VM2
YCbCr
ET-MD95VM2
For the setting of
AUTO1
S video / Video terminal input signal
: AUTO1 NTSC PAL SECAM
PAL60 NTSC4.43
: AUTO2 NTSC PAL-M
PAL-N
For the setting of
AUTO1
For the setting of
AUTO2
For 720P and 1080i input
For 480i, 576i, 480p, 576p input
The SYSTEM SELECTOR button
is ineffective with other types of
signals.
When the STD (standard) button
is pressed while changing the
system mode (with the SYSTEM
SELECTOR), the projector
automatically returns to AUTO1,
AUTO2, or AUTO.
For the details on the setting for
AUTO1, AUTO2 or YCbCr, refer
to page 81.
“AUTO 1”: Selection is automatically made out of NTSC, PAL, SECAM, NTSC4.43 and PAL60.
“AUTO 2”: Selection is automatically made out of NTSC, PAL-M and PAL-N.
RGB1/RGB2 terminal input signals
For 720p, 1080i input: RGB YP
B
P
R
For 480i, 576i, 480p, 576p input: RGB YCbCr
For the signals other than those above, SYSTEM SELECTOR button is invalid.