Panasonic PT-DW7700 ENG - Manual (Page 67)

67
ADVANCED MENU
DIGITAL CINEMA REALITY AUTO
FORMAT
SMPTE
BLANKING
INPUT RESOLUTION
CLAMP POSITION
EDGE BLENDING
OFF
SYNC.TERM 75
RASTER POSITION
:MENU SELECT
:CHANGE
Press the “ENTER” button.
The ADVANCED MENU screen will be displayed.
Select “SYNC.TERM” with the
buttons.
Switch the input impedance (signal
level) of the synchronization signal
with the
buttons.
• These buttons toggle between 75 Ω and HI-Z
(TTL).
SYNC.TERM
75
Ω
HI-Z (TTL)
Amplitude: 0.6V[p-p] to 4.0V[p-p]
High level: 2.0 V or over
Low level: 0.8 V or lower
Input impedance Signal level
75
Ω
1 k
Ω
• Switch the input impedance according to the input signal.
• The factory default is 75
Ω.
• The clock phase and image position may become out of balance during this switching operation.
Please make readjustment accordingly.
Note
ADVANCED MENU
DIGITAL CINEMA REALITY AUTO
FORMAT
SMPTE
BLANKING
INPUT RESOLUTION
CLAMP POSITION
EDGE BLENDING
OFF
SYNC.TERM 75
RASTER POSITION
RASTER POSITION
V:
0
H: 0
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
SECURITY
Raster position
When the whole area where the input picture can be displayed is not used, the picture can be moved to any
position inside the display area.
Procedure of adjustment
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “ADVANCED MENU” with the
buttons.
Press “ENTER” button.
The ADVANCED MENU screen will be displayed.
Select “RASTER POSITION” with the
buttons.
Press the “ENTER” button.
The RASTER POSITION screen will be displayed.
Adjust the position with the , ,
and buttons.
Press the “MENU” button three times.
The on-screen indications disappear and the
normal screen appears again.
(Continued on next page)