Panasonic WJ-NV200 - - Manual (Page 86)

86
Error logs
This section describes the display contents on the status display panel of the main monitor, the logs of error occurrence (error
logs) and their details.
The display contents of each error logs are common between the main monitor and the web browser.
• "x" indicates the HDD (hard disk drive) number.
• "f" indicates the cooling fan number.
• "cc" indicates the camera number.
About the error logs and the network logs
Description Status display panel Error log
Output from
connector
Thermal error warning Thermal error Thermal error Recorder error
FAN warning Fan error: Fanf Fan error: Fanf Recorder error
Network camera error detection Communication error: Cam. cc Communication error: Cam. cc Camera error
Network camera error recovery − Communication error : –
Network camera error detection
(audio) Communication error: Cam. cc Communication error: Cam. cc Camera error
Network camera error recovery (audio) − Audio communication recov-
ered: Cam. cc –
Video loss (Notification of video input
signal loss occurred on the encoder) Video loss: Cam. cc Video loss: Cam. cc Camera error
Video loss recovery (Notification of
video input signal loss recovered on
the encoder) − Video recovered: Cam. cc –
Recording error detection Recording error Recording error Recording error
SMART warning SMART warning: HDDx SMART warning: HDDx HDD error
HDD hour meter warning HDD hour meter warning: HDDx HDD hour meter warning: HDDx HDD error
HDD SKIP* warning − HDD skip: HDDx –
HDD write error − Write error: HDDx –
HDD read error − Read error: HDDx –
Alteration detection Altered: Cam. cc Altered: Cam. cc Recorder error
Remove auto links (per HDD) HDD removed: HDDx HDD removed: HDDx HDD error
HDD format error Format error: HDDx Format error: HDDx HDD error
HDD removal error (Properly recog-
nized HDD was removed without
proper operations.) Swap warning: HDDx Swap warning: HDDx HDD error
Reboot (Related to CPU) − System reboot(CPU) −
Reboot (Related to DEC) − System reboot(DEC) −
Reboot (Related to NW error) − System reboot(NW error) −
Failed to write data on the media Copy error Write error: SD card −
Failed to read the data from the media − Read error: SD card −
Copy media FULL − No available space: SD card −
NW link error Network link error – Network error
Line speed warning (When line speed
becomes "Half" while "Auto" is being
set) Line speed warning Line speed warning −
When time is not adjusted due to the
time difference of 1000 second or
more from the NTP server Skip time adjustment Skip time adjustment −
Failed to resolve an address of
Panasonic alarm protocol from DNS − Address error: PANASONIC
ALARM Network error
No response from a notified address
of Panasonic alarm protocol − No response: PANASONIC
ALARM Network error
Undefined error of Panasonic alarm
protocol − Other error: PANASONIC
ALARM Network error
* "HDD SKIP" is the function that continues recording on another hard disk drive even if an error occurs, such as an HDD write
error.