CatEye PW-TR100 Power Unit - Manual (Page 37)

MODE- 1
MODE- 2
MODE- 2 MODE- 1
37
PW-TR100 : POWER UNIT
Power select
Wheel selection
Tire circumference input
Auto-mode
Sound
Date
Setting clock
Manual odometer input
Speed unit
Defining remote button setting
Cadence zone
Heart rate zone
Heart rate sensor ID
Data file
Data storage
PC Link
Torque
Power select
* For the basic information on
how to use the menu screen, re-
fer to “Configuring main unit”
on page 35.
Menu screen
Operation Guide
MODE- 1 MODE- 1
S/S/E
MODE- 1
MODE- 1
S/S/E
On
OFF
S/S/E
MODE- 1 or MODE- 2
S/S/E
Tire circumference input
This option allows you to change the tire size, corresponding to the wheel size (A or B) selected in “Wheel
selection” on the previous page.
Setting range: 0100 to 3999 m
The setting cannot be changed; the setting is checked during measurement.
NOTE: • Before tire circumference input, it is necessary to stop the measurement and reset all mea-
sured data.
• Not resetting all measured data causes the “PLEASE rESEt” indication to be displayed, making
selection impossible.
• Specifying a numerical value outside the setting range causes the “Error” indication to be
displayed, making selection impossible.
Wheel selection menu screen
Sound menu screen
Tire circumference
input menu screen
Changing
numerical values
Changing
numerical values
Select
Select
Auto-mode
menu screen
Digit shift
Auto-mode
Set auto-mode on/off. (For auto-mode information, see page 29)
The auto-mode function is initially set to ON.