Vaddio AV Bridge - Manual (Page 11)

AV Bridge
Vaddio AV Bridge - Document Number 342-0518 Rev D. Software Version 2.1.0 Page 11 of 36
System Configuration and Programming:
Front Panel Menu
The front panel menu system allows some basic configuration of the AV Bridge and serves to display the
important system parameters and settings. The menu tree is depicted below:
> Start Page: Initializing and Audio Ladder Appear
> Main Menu
> Audio Inputs (Selectable from front panel)
> Balanced (Low Z)
> Unbalanced (High Z)
> Video Inputs (Selectable from front panel if connected to video source only)
> Auto
> HD YPbPr
> HD RGBHV
> HDMI
>SD (SD stands for Standard Definition, NTSC or PAL)
> Streaming
> USB Streaming
> IP Streaming (resolution and quality will be shown)
Resolution (i.e. 720p)
Quality (i.e. High Quality, Standard, Low bandwidth)
>Network Configuration (read only)
>Host Name
> Network Settings (read only)
> Mac Address:
> IP Address:
> Subnet Mask:
> IP Gateway:
>Type: DHCP
>
Version
> 2.1.0
Selecting Audio & Video Input Sources:
Video Input Selection: This allows the user to select between Auto-Detection, HDMI, HD, or SD video inputs.
These selections correspond to the connectors on the back panel of the AV Bridge. The HD connector (DE-15)
will support signal formats of up to 1080p/60 on either YPbPr or RGBHV inputs. The HDMI connector only
accepts HDMI and DVI signals up to 1080p/60. The SD signals are Standard Definition, composite video only at
480i/NTSC and 576i/PAL. This SD input is not an SDI or HD-SDI input, it’s just standard definition.
Audio Input Selection:
The user has the ability to select between the balanced stereo audio line input and an unbalanced stereo line
input.