Vaddio AV Bridge - Manual (Page 21)

AV Bridge
Vaddio AV Bridge - Document Number 342-0518 Rev D. Software Version 2.1.0 Page 21 of 36
5) This update can take up to 15 minutes, the pop-up message window will identify progress of update and when
it is completed. After the update is complete, the new version can be verified on the front panel LCD display or
user can log on the web pages and navigate to the Help page. The version is displayed under system
information. It is also located under the System page.
Restoring Factory Defaults
The AV Bridge can be restored to factory defaults with the DIP Switches on the rear of the device. It can also be
done remotely with the internal web pages. The Process for defaulting AV Bridge to factory settings is:
 Step 1: Place all dip switches to the off position (down). A warning will be issued (without crocodile sign).
Warning: Current Settings will be erased.
 Step 2: Press Reset on the front panel of the AV Bridge. Device will reboot to factory settings.
 Step 3: Put all dip switches back up and proceed to set up the AV Bridge once again.
➨
➨