Vaddio AV Bridge - Manual (Page 5)

AV Bridge
Vaddio AV Bridge - Document Number 342-0518 Rev D. Software Version 2.1.0 Page 5 of 36
Unpacking:
Carefully remove the device and all of the parts from the
packaging. Unpack and identify the following parts:
For P/N 999-8510-000 AV Bridge (North America)
One (1) AV Bridge HD Audio/Video Encoder
One (1) Pair of Rack Ears
One (1) 18 VDC, 2.75 Amp Switching Power Supply with AC Power Cord for North America
One (1) 6’ (1.83m) USB 2.0 Cable, Type-A Male to Type-B Male (black)
One (1) Set of four rubber feet for bottom of enclosure (if not racked)
One (1) Install Guide and User Manual
For P/N 999-8510-000 AV Bridge (International)
One (1) AV Bridge HD Audio/Video Encoder
One (1) Pair of Rack Ears
One (1) 18 VDC, 2.75 Amp Switching Power Supply
One (1) Euro Power Cord
One (1) UK Power Cord
One (1) 6’ (1.83m) USB 2.0 Cable, Type-A Male to Type-B Male (black)
One (1) Set of four rubber feet for bottom of enclosure (if not racked)
One (1) Install Guide and User Manual
Anatomy of the AV Bridge
Image: Front Panel with Feature Callouts
1) Video Input Detect: Blue LED indicator will illuminate validating that an active video input source has been
detected by AV Bridge.
2)
LCD Display: LCD display for menu system - displays configuration information.
3) Menu Navigation Controls: Rotary navigation knob to access menu items and information on LCD display.
Also includes Selection and Cancel buttons for user interface of system menu.
4) Mute Controls: Video mute button stops streaming video to USB and injects color bar image. Audio mute
button stops audio from being sent on USB record channel.
5) Audio Level Controls: Rotary encoder knob to adjust audio input level being sent to USB record channel.
Functions as the master volume control for both left and right input channels. Volume increases by rotating
clockwise and decreases by rotating counterclockwise.
6) Power/Reset Button: System reset for the A/V Bridge.
7) Input LED Indicators: Depicts the current video (HDMI, HD, or SD) and audio input selection and signal
characteristics - Unbalanced (High-Z) or Balanced (Low-Z).
AV Bridge shown with provided Rack Ears Attached
➊ ➋ ➌ ➍ ➎ ➏ ➐
AV Bridge shown
without Rack
Ears Attached