Vaddio AV Bridge - Manual (Page 12)

AV Bridge
Vaddio AV Bridge - Document Number 342-0518 Rev D. Software Version 2.1.0 Page 12 of 36
Network Settings:
The Network settings is a “read only” message representing the current IP addresses defined for the AV Bridge
by the webpages. Properties displayed include:
 Mac
Address:
 IP
Address:
 Subnet
Mask:
 IP
Gateway:
 Net Type: DHCP
Hotkey Buttons and Indicators:
A number of common user controls have been included on the front panel for quick access by the user during a
streaming session. Dedicated controls and indicators include:
 Video Mute:
Stops the video input source from being sent to the Host PC and replaces with a color bar image. The Video
Mute button will be backlit Red when in mute state.
 Audio Mute: This button mutes the input audio source being sent to the Host PC. The Audio Mute button
will be backlit in red when in mute state.
 Audio Level: A rotary control with 10 steps (but goes to 11) allows the user to adjust the audio input level
being sent to the Host PC. A visual volume level is presented on the LCD to provide feedback of the current
audio level. (Note: This level is not the same as the PC’s record channel volume controls.) The audio
ladder will show a relative volume level as it is adjusted however, after it shows that level for a few seconds it
will act as a VU meter.
 Video Input LED:
A visual LED indicator represents the current video source being sent to the Host PC. The selected source
will be indicated in Blue.
 Audio Input LED: A visual indication of current audio input source being sent to the Host PC. Selected
source will be blue.
Web Pages Tour:
Screen Shot: Login
The AV Bridge web server is intended as an administrator’s management tool and requires authentication for
access. The user account name is admin and the default password is password, which can be modified after
initial login to the system.
➲