Vaddio AV Bridge - Manual (Page 29)

AV Bridge
Vaddio AV Bridge - Document Number 342-0518 Rev D. Software Version 2.1.0 Page 29 of 36
Network Settings
 NAME
network settings - get current network settings
 SYNOPSIS
network settings {get}
 DESCRIPTION
Method used to get the current network settings of the device
 OPTIONS
get Get the current network settings for the machine
 EXAMPLES
network settings get
MAC Address:
00:04:a3:85:0a:ee
IP Address:
10.10.8.116
Netmask:
255.255.255.0
Gateway:
10.10.8.100
Returns the current network settings for mac address, IP address, net mask, and gateway
Network
 NAME
network - Gets the current network settings or pings an IP address
 SYNOPSIS
network {settings get | ping [count <count>] [size <size>] <destination-ip>}
 DESCRIPTION
Method used to get the current network settings or check network
 OPTIONS
settings
Get the current network settings
ping Send ICMP ECHO_REQUEST to network host
 EXAMPLES
network settings get
Gets the current network settings
----
network ping count 1 10.10.10.100
Pings 10.10.10.100 once and displays results
Serial
 NAME
serial - Sets or gets the current serial settings
 SYNOPSIS
serial {get|9600|19200|38400}
 DESCRIPTION
The serial command is used to get or set the serial baud rate
 OPTIONS
get Returns the serial speed
9600 Sets the serial baud rate to 9600
19200 Sets the serial baud rate to 19200
38400 Sets the serial baud rate to 38400
 EXAMPLES
serial get
Gets the current serial baud rate
serial 38400
Sets the external serial baud rate to 38400