Vaddio HE120 Operating Instructions - Manual (Page 12)

12
Shooting
When performing the operations
using the wireless remote control
  Changing the camera’s direction
Moving the camera toward the left or right (panning):
Press the [  ] or [  ] button.
Moving the camera up or down (tilting):
Press the [  ] or [  ] button.
Moving the camera diagonally:
Press the [  ] or [  ] button and [  ] or [  ] button at
the same time.
Returning the camera to the reference position:
Press the [HOME] button for 2 seconds.
  Using the zoom function
Zooming in (the subject becomes magnified in size):
Press the [T] button of [ZOOM].
Zooming out (the subject becomes reduced in size):
Press the [W] button of [ZOOM].
  Switching the panning/tilting and lens
operation speed
Changing the direction or zoom at high speed:
Press the [FAST] button.
Changing the direction or zoom at low speed:
Press the [SLOW] button.
The speeds at which the pan, tilt, zoom focus and iris are
controlled are now switched.
When performing the operations using the controller
  Changing the camera’s direction
Moving the camera toward the left or right (panning):
Tilt the [PAN/TILT] lever toward L or R.
Moving the camera up or down (tilting):
Tilt the [PAN/TILT] lever toward UP or DOWN.
Moving the camera diagonally:
Tilt the [PAN/TILT] lever diagonally.
Returning the camera to the reference position:
If the controller has a [HOME] button, press the
[HOME] button.
  Using the zoom function
Zooming in (the subject becomes magnified in size):
Tilt the [ZOOM] lever toward the TELE direction.
Zooming out (the subject becomes reduced in size):
Tilt the [ZOOM] lever toward the WIDE direction.
  The indicator displays of the AW-RP655 are
indicators that show the positions of the optical
zoom. They will not work for electronic zooming.
Note
  Switching the panning/tilting and lens
operation speed
AW-RP655 and AW-RP555
1
Press the [SPEED] button.
Each time the [SPEED] button is pressed, the control
speed is switched between the high speed (the button’s
lamp is off) and low speed (the button’s lamp is lit).
The speeds at which the pan, tilt, zoom focus and iris are
controlled are now switched.
AW-RP50
Refer to the Operating Instructions of the controller.