Vaddio HE120 Operating Instructions - Manual (Page 51)

51
Camera menu
Setting the camera menu items
(continued)
  Maintenance screen
Maintenance
Firmware Version
IP Network
Initialize
Return
Firmware Version
This is selected to display the Firmware Version screen
on which the user can check the version of the firmware
which is currently installed in the unit.
IP Network
This is selected to display the IP Network screen on which
the user can check the IP Address, Subnet Mask and
Default Gateway settings which have been established in
the unit.
Initialize
This is selected to display the Initialize screen on which
the user can initialize the camera settings.
For details on operation, refer to “Concerning initialization”
on page 52.
Return
Use this to return to the previous menu.
  Firmware VER 1/2 screen
Firmware VER 1/2
CPU Software
Interface V01.00
Camera Main V01.00
Servo V01.00
Network V01.00
EEPROM
Interface V01.00
Camera Main V01.00
Return
CPU Software Interface
This is selected to display the software version of the
interface unit.
CPU Software Camera Main
This is selected to display the software version of the
camera unit.
CPU Software Servo
This is selected to display the software version of the
servo unit.
CPU Software Network
This is selected to display the software version of the
network unit.
EEPROM Interface
This is selected to display the EEPROM version of the
interface unit.
EEPROM Camera Main
This is selected to display the EEPROM version of the
camera unit.
Return
Use this to return to the previous menu.
 
Firmware VER 2/2 screen
Firmware VER 2/2
FPGA
Frontend V01.00
Backend V01.00
Lens V01.00
Return
FPGA Frontend
This is selected to display the FPGA version of the front
end unit.
FPGA Backend
This is selected to display the FPGA version of the back
end unit.
FPGA Lens
This is selected to display the FPGA version of the lens
unit.
Return
Use this to return to the previous menu.