Vaddio HE120 Operating Instructions - Manual (Page 47)

47
Camera menu
Setting the camera menu items
(continued)
Color Bars Setup [Off, On]
The setting of this item takes effect only when “59.94Hz”
has been selected as the “Frequency” setting.
It enables the color bar setup level (Off: 0.0IRE or
On: 7.5IRE) of the video output signals to be selected.
Return
Use this to return to the previous menu.
  Changing the format
When the currently selected format is to be changed to
another format on the Output screen, the pre-format-change
confirmation screen is displayed.
Pre-format-change confirmation screen
Format
Do you want to set
Format(1080/59.94p(i))?
CANCEL
O.K.
 The format to be set is displayed within the
parentheses on the screen.
 When the cursor is moved to “O.K.” on the pre-format-
change confirmation screen and the change is entered,
the post-format-change confirmation screen appears
after the format has been changed.
Post-format-change confirmation screen
Format
Are you O.K.?
No
Yes
 If the cursor is moved to “Yes” and this selection is
entered, the display returns to the Output screen in the
post-change format.
 If the cursor is moved to “No” and this selection is
entered, the display returns to the Output screen after
the format has been changed back to the pre-change
format.
The same operation is also performed when none of
the unit’s controls have been operated for a period in
excess of 10 seconds.
 When an external sync signal which is not supported
by the post-change format has been input, the image
will be disturbed.
In a case like this, either change the external sync
signal or use internal synchronization.