Vaddio ProductionVIEW HD-SDI MV - Manual (Page 17)

ProductionVIEW HD-SDI MV
ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 17 of 36
Using the Multiviewer and Control modes with the Optional TeleTouch™ HD Touch Screen LCD Monitors:
Vaddio has the optional TeleTouch 22” and 18.5” Resistive Touch Technology, Full HD LCD Monitors available
for use with the ProductionVIEW™ HD MV and ProductionVIEW HD-SDI MV Multiviewer Video Consoles.
The Vaddio TeleTouch LCD touch screen monitors for the ProductionVIEW MV series consoles use 5-wire
resistive touch technology, which allows the operator to control the consoles with the simple touch of a finger,
gloved hand or stylus. The TeleTouch monitors can be configured to display up to six (6) input windows and two
(2) larger Preview and Program windows with green and red tally borders. In addition, each PTZ camera input
can store up to 12 video thumbnail preset camera shots.
Unlike retail/consumer grade monitors, the TeleTouch LCD panels are high-end, industrial quality and are
designed for durability when used in demanding control environments.
Connecting the TeleTouch Touch Screen LCD Monitors to the ProductionVIEW HD-SDI MV:
Step 1: To use the Multiviewer and TeleTouch Touch Screen Controller, connect the main RS-232 port (DB-9-F)
of the ProductionVIEW HD-SDI MV to the RS-232 port of the TeleTouch Monitor with the cable provided.
Connect the provided Vaddio HDMI to DVI-D Adapter Cable from the multiviewer output (preview HDMI
connector) to the DVI-D input of the TeleTouch Monitor.
Step 2: In the Control Menus, go to the menu item “MULTIVIEWER” and select “ON”. Then go to the System
Menu and go to the menu item “TOUCH SCREEN” and select the 22” or the 18.5” monitor, which sets up the
touch screen coordinates. To set the correct resolution for the TeleTouch, go to “System Menu” and then select
“Preview Output” Select either 1080p/60Hz (North America) or 1080P/50 Hz (International) output resolution for
the multiviewer. (see TeleTouch Touch Screen Control Panel with Multi-View Panel Layout Options on Page 4 for
more information).
TeleTouch 22” HD Touch Screen LCD Monitor with Base
(Simulated ProductionVIEW Multiviewer Output)
TeleTouch 18.5” Rack Mount HD Touch Screen LCD Monitor
(Simulated ProductionVIEW Multiviewer Output)
RS-232 Cable (Supplied with TeleTouch)
HDMI to DVI-D
Cable
(Supplied with
ProductionVIEW
HD-SDI MV)
ProductionVIEW HD-SDI MV with Built-in Multiviewer
22” TeleTouch Touch Screen LCD Monitor
(Parrot not to scale)
RS-232
Port on
DB-9-F
RS-232
Port on
DB-9-F