Vaddio ProductionVIEW HD-SDI MV - Manual (Page 29)

ProductionVIEW HD-SDI MV
ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 29 of 36
Appendix 1: Video and Control Pin-out Table for ProductionVIEW HD-SDI MV
Camera Control Ports 1 through 6 - RS-232 on RJ-45 Connectors:
PIN# Signal
1) Unused
2) Unused
3) Unused
4) Unused
5) Unused
6) GND
7)
TXD (to RXD of camera)
8) RXD (from TXD of camera)
Appendix 2: RS-232 Control
The ProductionVIEW HD-SDI MV has six (6) discrete camera control ports which eliminates the need for daisy-
chaining control cabling. With ProductionVIEW HD-SDI MV, all cabling configurations are home run wiring
configurations. Each Channel will auto-configure the input channel for control of the camera attached.
Vaddio uses simple control protocols to accomplish custom programming with the ProductionVIEW HD-SDI MV.
The Communication Specification, API and Programming Language are listed below and definitions are listed on
the next page. Note: All commands must be followed by a carriage return.
Communication Specification
Communication Speed: 9600 bps (default)
Start bit: 1
Stop bit: 1
Data bits: 8
Parity: None
No Flow control
Control Port - RS-232 on DB-9F Connector
PIN# Signal
2) TXD
3)
RXD
5) GND
All other pins - Unused
12345678