Vaddio ProductionVIEW HD-SDI MV - Manual (Page 21)

ProductionVIEW HD-SDI MV
ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 21 of 36
>Multiviewer Output
>Preview
SDI 1080p/59.94Hz
SDI 1080p/50Hz
SDI 1080i/59.94Hz
SDI 1080i/50Hz
HDMI 1080p/59.94Hz
HDMI 1080p/50Hz
HDMI 1080i/59.94Hz
HDMI 1080i/50Hz
DVI Input Mode
>Select
>DVI Input Mode Menu
Low Res (1360 x768 @60 Hz and resolution below)
High Res (1440 x 900 @ 60 Hz and resolutions above)
SD Video Format
>Select
> Program Output
>Squeeze
>Letter Box
>Crop
>Preview Output
>Squeeze
>Letter Box
>Crop
Video Input Note: ProductionVIEW HD-SDI MV Auto configures each Input Port for each camera connected.
Default Camera (Automatic and Start-up Modes – the default input selected on the Program bus when the system is turned on)
>Select
> 00 – 06
Selects inputs 1 through 6 as the default camera (default is 01)
Default Preset (Automatic Mode – the default preset that the camera is sent to when the system is in Auto Mode. Only reverts to the
configured default position after a trigger has been activated in Auto Mode)
>Select
> 01 – 12
Assigns camera preset 1 through 12 as Default Preset on the default camera (default is 01)
Def Idle Rtn (Default Idle Return Position - Automatic Mode only using an external trigger such as a StepVIEW Mat)
>Select
>00 – 60
Default Camera Idle Return Timer - with no other trigger input, the system returns to the Default Camera and Default
Preset after this time elapses (The default setting is 10 or roughly 10 seconds. To disable function, set to 00. )
Pan Dir Menu (Pan Direction Menu)
>Select
>All Ports: Normal or Invert (default is Normal) Inverts the Joystick Pan Direction (Inverted - left = right)
>Port 01: Normal or Invert
>Port 02: Normal or Invert
>Port 03: Normal or Invert
>Port 04: Normal or Invert
>Port 05: Normal or Invert
>Port 06: Normal or Invert
>Select Returns to Main Menu
Tilt Dir Menu (Tilt Direction Menu)
>Select
>All Ports: Normal or Invert (default is Normal) Inverts the Joystick Tilt Direction (Inverted - up = down)
>Port 01: Normal or Invert
>Port 02: Normal or Invert
>Port 03: Normal or Invert
>Port 04: Normal or Invert
>Port 05: Normal or Invert
>Port 06: Normal or Invert
>Select Returns to Main Menu
Zoom Direction
>Select
>Normal or Invert (default is Normal)
Inverts the Joystick Zoom Direction (Inverted - Clockwise twist = zoom out)