Vaddio ProductionVIEW HD-SDI MV - Manual (Page 22)

ProductionVIEW HD-SDI MV
ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 22 of 36
Preset Pan Speed
>Select
>01 – 24 (default is 18)
Sets the Pan Speed on all cameras between camera presets (24 is fastest)
(This parameter does not affect the Pan Speed or sensitivity of the Joystick)
Preset Tilt Speed
>Select
>01 – 20 (default is 15)
Sets Tilt Speed on all cameras between camera preset changes (20 is fastest)
(This parameter does not affect the Tilt Speed on the Joystick)
Preset Zoom Speed
>Select
>00 – 07 (default is 04)
Sets Zoom Speed on all cameras between camera presets
Ext Triggers/Tally (Automatic Mode)
>Select
>Trigs 6 Cam 1, 6 Cam 2
>Trigs All 12 Cam 1
External Trigger Assignment - 6 triggers each for cameras 1 and 2, or all 12 triggers for camera 1 presets
>Tally A=PGM B=PRE
External Tally A (Program) - 6 connections for program camera tally triggers
External Tally B (Preview)- 6 connections for preview camera tally triggers
>Tally A+B=PGM
Total of 12 Program Tally Triggers:
External Tally A (Program) - 6 connections for program camera tally triggers
External Tally B (Program) - 6 connections for program camera tally triggers
Select Follow Preview
>Select
>On or Off
When activated, camera selection switching follows the Preview bus selection, immediately transferring joystick and
camera control directly to the camera selected on the Preview bus (On is default). NOTE: This function only works in
Single Bus Mode – and not in Dual Bus Mode.
Canon Shot Time
>Select
>01 – 60 (default is 02)
This parameter sets the time (in seconds) that the Canon Camera will move from its current position to the selected
Canon Camera Preset position.
Canon ND Filter
>Select
>All Ports: (select– Disable, Off, 1/6, 1/32)
>Port 01: (select– Disable, Off, 1/6, 1/32)
>Port 02: (select– Disable, Off, 1/6, 1/32)
>Port 03: (select– Disable, Off, 1/6, 1/32)
>Port 04: (select– Disable, Off, 1/6, 1/32)
>Port 05: (select– Disable, Off, 1/6, 1/32)
>Port 06: (select– Disable, Off, 1/6, 1/32)
Canon Shutter Spd
>Select
>All Ports: (select– Disable, NTSC ¼ PAL 1/3, NTSC 1/15 PAL 1/12, NTSC 1/60 PAL 1/50, NTSC 1/100,
NTSC 1/1000)
>Port 01: (select– Disable, NTSC ¼ PAL 1/3, NTSC 1/15 PAL 1/12, NTSC 1/60 PAL 1/50, NTSC 1/100,
NTSC 1/1000)
>Port 02 (select– Disable, NTSC ¼ PAL 1/3, NTSC 1/15 PAL 1/12, NTSC 1/60 PAL 1/50, NTSC 1/100,
NTSC 1/1000)
>Port 03: (select– Disable, NTSC ¼ PAL 1/3, NTSC 1/15 PAL 1/12, NTSC 1/60 PAL 1/50, NTSC 1/100,
NTSC 1/1000)
>Port 04: (select– Disable, NTSC ¼ PAL 1/3, NTSC 1/15 PAL 1/12, NTSC 1/60 PAL 1/50, NTSC 1/100,
NTSC 1/1000)
>Port 05: (select– Disable, NTSC ¼ PAL 1/3, NTSC 1/15 PAL 1/12, NTSC 1/60 PAL 1/50, NTSC 1/100,
NTSC 1/1000)
>Port 06: (select– Disable, NTSC ¼ PAL 1/3, NTSC 1/15 PAL 1/12, NTSC 1/60 PAL 1/50, NTSC 1/100,
NTSC 1/1000)