Vaddio WallVIEW CCU HD-22 and HD-30 CAT-5 - Manual (Page 9)

WallVIEW Universal CCU HD-22/30
Vaddio WallVIEW Universal CCU Cat-5 Version. Document Number 342-0645 Rev C Page 9 of 20
The Version Menu screen displays the software versions of the Vaddio cameras attached as a convenience to
the operator. The versions shown include the zoom module, the motors and the camera.
The Display Menu provides controls for the blue LED display, including Bias (brightness), Display Mode - Normal
(negative mode) and Inverted (positive mode) and overall contrast are provided. Put dip switch #5 UP to access
this menu, make the adjustment and it is recommended that dip switch #5 is returned to the DOWN position so
this menu is no longer seen.
Version Display Menu
Put dip switch #5 UP to access this menu where the
firmware versions of the CCU, camera, motors are
displayed. The FPGA date is also displayed
CAT-5 CCU HD-22
DSPLY NORML
> Bias
1/9
Contrast 204
Display Menu
Put dip switch #5 UP to access the Display Menu.
CAT-5 CCU HD-22
CCU Version VERSION
V01.0x.ox CAM: V01.0X.0X *
FPGA Date: MOT: V02.0X.0X *
XX/XX/20XX