Vaddio WallVIEW PRO H900 - Manual (Page 5)

Quick-Connect PRO for the BRC-H900 Camera
© 2013 Vaddio - All Rights Reserved. Document Number 342-0506 Rev A Page 5 of 16
Information:
For RS-232 control information, please see the full-length Technical Manual for the BRC-H900. This manual can
be found either on the Sony or the Vaddio website.
Unpacking
998-6895-000: WallVIEW PRO H900 - North America
Carefully remove the device(s) and all parts from the packaging. Please do not toss the packaging yet, just set it
aside where it won’t be in the way. Unpack and identify the following parts:
 One (1) Sony BRC-H900 PTZ Camera
 One (1) 998-1105-009, Quick-Connect PRO Series Interface
 One (1) 36 VDC 2.78 Amp power supply with power cord for North America
 One (1) 2-pin Molex 5.0mm Euro-style IR Forward connector
 One (1) EZIM (EZ Interface Module) for Quick-Connect PRO
 Two (2) 6-32 x .188” Pan Head for attaching EZIM to the Wall Mount
 One (1) 440-6704-000 Break-out Cable from EZIM to Camera
 One (1) 998-1001-232 EZCamera Control Adapter
 One (1) 535-2000-225 Wall Mount for Camera (in Black)
 Four (4) #8 x 1.25” Sheet Metal Screws
 Four (4) Wall Anchors (EZ Anchors)
 Two (2) ¼” - 20 Camera Mounting Screws
 One (1) Documentation
998-6895-001: WallVIEW PRO H900 - International
Unpack and identify the following parts:
 One (1) Sony BRC-H900 PTZ Camera
 One (1) 998-1105-009, Quick-Connect PRO Series Interface
 One (1) 36 VDC 2.78 Amp power supply
 One (1) Euro Power Cable
 One (1) UK Power Cable
 One (1) 2-pin Molex 5.0mm Euro-style IR Forward connector
 One (1) EZIM (EZ Interface Module) for Quick-Connect PRO
 Two (2) 6-32 x .188” Pan Head for attaching EZIM to the Wall Mount
 One (1) 440-6704-000 Break-out Cable from EZIM to Camera
 One (1) 998-1001-232 EZCamera Control Adapter
 One (1) 535-2000-225 Wall Mount for Camera (in Black)
 Four (4) #8 x 1.25” Sheet Metal Screws
 Four (4) Wall Anchors (EZ Anchors)
 Two (2) ¼” - 20 Camera Mounting Screws
 One (1) Documentation