Vaddio WallVIEW PRO H900 User Manual
Page 6
Quick-Connect PRO for the BRC-H900 Camera
© 2013 Vaddio - All Rights Reserved. Document Number 342-0506 Rev A
Page 6 of 16
Anatomy of the Quick-Connect PRO System Interface
Image: Quick-Connect PRO Front Panel Indicator (left to right)
Power Light:
Illuminates when the power supply is plugged in the back of the Quick-Connect
This concludes our tour of the front panel.
Image: Quick-Connect PRO Rear Panel Connectors and Controls (left to right)
Power Supply Input:
The Quick-Connect PRO uses a 36VDC, 2.78 Amp power supply on a 5.5mm OD x 2.5mm ID connector.
Power on RJ-45:
Power is provided on a Cat-5 cable to EZIM (EZCamera Interface Module) which, powers the
camera up to a distance of 500’ (152.4m)
Cam Select Dip Switches:
Not applicable for H900 Systems - Leave All Switches Down.
IR Gain Multi-turn Encoder:
Not applicable for H900 Systems
IR Output on 2-pin Molex 5.0mm Connector:
Not applicable for H900 Systems
Y-Gain:
Adjusts Y-Gain and allows the user to fine tune the video signal especially over longer cable lengths.
Adjust to taste and system requirements.
Distance:
Distance Adjustments for Cat-5 cable (<100’, 200’, 300’, 400’+) equalizes the length of the twisted
pairs for improved video performance. Set to the position that delivers the best video.
Video Outputs on BNC-F Connectors:
Three (3) HD video signals (YPbPr) at any one time can be transmitted
from the EZIM the Quick-Connect PRO The H-900 system is equipped with HD breakout cable only. There is an
optional SD breakout cable available that will supply Y/C and Composite video.
Connector Labels and Supported Video Signals
Y/Y:
Y of YPbPr - or - Y (luminance) of Y/C on BNC-F connector
PB/C:
PB of YPbPr - or - C (chrominance) of Y/C on BNC-F connector
PR/COMP:
PR of YPbPr - or - Composite (CVBS) Video on BNC-F connector
Video RJ-45:
This RJ-45 receives the camera’s three (3) differential video signals from the EZIM on the Video
Cat-5 cable.
Later on, in this exciting yet easy to understand manual, there will be some tips to
optimize the performance of the WallVIEW PRO H900.