American Power Conversion RT XLI/XLICH - Manual (Page 5)

Smart-UPS RT 15000/20000 VA 230 Vac Stack/Rack-Mount 6U User Manual 1
Introduction
About this UPS
The American Power Conversion (APC®) Smart-UPS® RT is a high performance uninterruptible power
supply (UPS) that provides protection for electronic equipment from utility power blackouts, brownouts, sags
and surges. The UPS protects electronic equipment from small utility fluctuations and large disturbances by
providing continuous on-line double converted power. The UPS provides battery backup until utility power
returns to safe levels or the batteries are fully discharged.
The UPS and the external battery pack (XLBP) are packaged separately.
Unpack package contents
Read the Safety Guide before installing the UPS.
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Check the package contents:
NOTE: The model and serial numbers are located on a small, rear panel label. For some models, an
additional label is located on the chassis under the front bezel.
• UPS
• Input wiring tray
• Output wiring tray
• PowerView display module
• Front bezel
• DB9 serial cable
• Ethernet jumper cable for rear
panel network access
• Literature kit containing:
– Product documentation
– Smart-UPS® RT User Manuals CD
– Network Management Card Utility CD
– Network Management Card
documentation
– Safety information
– Warranty information
• Rack-mount models also include:
– Rail Kit
– Four ornamental screws
– Two cage nuts
– Two rail cleats
– Four pan head screws
– Two rack-mount brackets
– Eight flat head screws
4
8
4
2
2
2
Hardware for rack-mount
models Rack-mount units:
pan head screws for securing rail cleats to UPS
Flat head screws for securing
rack-mount brackets or tie brackets to the unit
Rack-mount units:
ornamental screws for securing the unit to the
rack
Rack-mount units:
cage nuts for rack installation
rack-mount brackets
rail cleats