American Power Conversion RT XLI/XLICH - Manual (Page 9)

Smart-UPS RT 15000/20000 VA 230 Vac Stack/Rack-Mount 6U User Manual 5
Install units in rack
4x
4x
Secure the UPS and the XLBP in the
rack using the cage nuts and
ornamental screws included in the
package.
Four ornamental screws and two cage
nuts must be used to secure each unit.
A cage nut must be used in the top
hole of each rack-mount bracket when
securing the unit in the rack.
The bottom hole of each rack-mount
bracket can be secured using an
ornamental screw in the threaded hole.
Replace the battery doors.
Tighten the screws to secure the battery doors.
Install and connect battery modules
Connect all eight battery modules.
Failure to do so may cause equipment
damage.
7 holes
7 holes