NaceCare Solutions NR20 - Manual (Page 10)

8
WORK
PREPARATION:MANOEUVERING THE MACHINE
By pulling the lever (A) lower the handle until the arms of
the user are lightly bent.
Using your thumb, push down on the safety lever (B) and
then engage the motor with the two levers (C).
The safety lever (A) must be pressed down every time
before the starting.
For safety reasons, the motor cannot be operated when
the handle is in the upright position.
WARNING:
By pressing down slightly on the handle, the
machine moves towards left, by raising the handle
slightly, the machine moves towards right.
MANOEUVRING THE MACHINE
Every time the operator uses the machine he/she must be
confident with the movements of the machine. Do not go
near other people or obstacles. Always Keep the power
cable behind the operator. Be careful not to work with the
machine near the power cable.
Don not use the machine on the same area for prolonged
periods of time, doing this could damage the floor.
CHEMICAL DISTRIBUTION
When chemical is required, use the lever (A) to release
the chemical solution from the tank.