Myron L 9PTK - Manual (Page 51)

47
2. Calibration of the Ultrameter III gain Factor for User mode is
not available when the calibration linc has been established.
The other calibration functions (i.e., Temperature Compensation
%/C settings and TDS Ratio settings) are still intact. To perform
a calibration of the User mode as described in User Calibration
Conductivity/TDS, pg. 28, the User mode Linc should be canceled.
See above, “Canceling User mode calibration “linc””.
3. Once a “linc” has been established for User mode, the “linc”
will apply to all measurement modes using User solution
selection (i.e., TDS/User, Cond/User or Res/User).
Xvi. bluDock™ wireless Data transFer instrUctiOns
nOte: Bluetooth® is a registered trademark of Bluetooth SIg. The
bluDock Bluetooth module is a registered Bluetooth device.
Requires Myron L bluDock™ accessory package, Model # BLUDOCK.
Package includes Ultrameter III hardware modification that allows the
unit to communicate wirelessly with a personal computer configured for
wireless device communication. Package also includes U2CI software
application that will operate on Windows XP, Vista and 7*, and Macintosh
OSX** based computer systems and Bluetooth USB adapter (dongle)
for computers that do not have Bluetooth capability.
A. Software Installation
1. Place Myron L Ultrameter III U2CI Installation CD v2.0.0 &
later into your computer or download U2CI application from the
Myron L website:
http://myronl.com/main/U2CI_Application_DL.htm
2. Upon opening, select the folder for your operating system.
3. Install U2CI application. See detailed installation instructions
on CD or Myron L website:
http://myronl.com/main/U2CI_Application_DL.htm
4. Additional drivers may be required. See our website for the
latest information.
B. Hardware Setup
For a computer without Bluetooth® capability:
If you don’t have the dongle that came with the BLUDOCK, one can be
ordered separately from the Myron L Company. Order Model # BDDO.
Plug in your dongle and install per manufacturer’s instructions.