Assemble the rotating element – Goulds Pumps API 3171 - IOM User Manual
Page 52
2. Attach the motor support (240):
If ...
Then...
You use the stuffing box
Attach the motor support (240) to the stuffing box with bolts (370J).
You do not use the stuffing box Attach the motor support (240) to the support plate (189) with bolts
(370J).
3. Attach the head column (192):
If...
Then...
You use the stuffing box
Attach the head column (192) to the stuffing box with bolts (370M).
You do not use the stuffing box Attach the head column (192) to the motor support with bolts
(370M).
Make sure that the vent holes are closer to the motor support.
240 370L
192
370M
189
132
Assemble the rotating element
CAUTION:
Two people should handle any shaft over 9 feet long. Improper handling can bend the shaft.
136
382 112
370C
193B 134 369A
122
400
333
113
415
370D
361A
332A
M/MT/L
Only
1. For all groups except S/ST, install the retaining ring (369A) on the shaft (122).
2. Install the thrust bearing (112) on the shaft.
Maintenance
50
Model API 3171 Installation, Operation, and Maintenance Manual