Goulds Pumps CV 3171 - IOM - Manual (Page 2)

2
CV 3171 IOM 05/11
Pump Safety Tips
Safety Apparel:
•
Insulated work gloves when handling hot
bearings or using a bearing heater
•
Heavy work gloves when handling parts with
sharp edges, especially impellers
•
Safety glasses (with side shields) for eye
protection, especially in machine shop areas
•
Steel-toed shoes for foot protection when
handling parts, heavy tools, etc.
•
Other personal protective equipment to protect
against hazard/toxic fluids
Coupling Guards:
•
Never operate a pump without a coupling guard
properly installed
Flanged Connections:
•
Never force piping to make a connection with a
pump
•
Use only fasteners of the proper size and
material
• Ensure there are no missing fasteners
•
Beware of corroded or loose fasteners.
Operation:
•
Do not operate below minimum rated flow, or
with suction/discharge valves closed
•
Do not open vent or drain valves, or remove
plugs while system is pressurized
Maintenance Safety:
•
Always lockout power
•
Ensure pump is isolated from system and
pressure is relieved before disassembling
pump, removing plugs, or disconnecting piping
•
Use proper lifting and supporting equipment to
prevent serious injury
•
Observe proper decontamination procedures
•
Know and follow company safety regulations
Observe all cautions and warnings highlighted
in pump Installation, Operation and Maintenance
Instructions.