ADTRAN Cable T1 ESF CSU ACE - Manual (Page 28)

Chapter 3. Installation
28 T1 ESF CSU Rackmount User Manual 61202066L1-1B
Network and DTE Connections
Network Connections
There is an eight-position modular jack labeled NET RJ45 on the rear of
the T1 ESF CSU RM interface board. This connector provides for
connections to the network connector. See Table 3-1 for the pinout of the
network connector.
Connector Type = (USOC) RJ48C
Table 3-1. Network RJ45 Pinout
DTE Connections
The rear of the T1 ESF CSU RM interface board also has eight-position
modular jack labeled EQ RJ45. This connector provides connections to
the DTE. See Table 3-1 for the pinout of the EQ connector.
Connector Type = (USOC) RJ48C
Table 3-2. Equipment (EQ) RJ45 Pinout
Pin Name Descriptions
1 R1 RX data ring
2 T1 RX data tip
3 Unused -
4 R TX data ring
5 T TX data tip
6, 7, 8 Unused -
Pin Name Descriptions
1 R1 TX data ring (to DTE)
2 T1 TX data tip (to DTE)
3 Unused -
4 R RX data ring (from DTE)
5 T RX data tip (from DTE)
6, 7, 8 Unused -