ADTRAN Cable T1 ESF CSU ACE - Manual (Page 7)

61202066L1-1B T1 ESF CSU Rackmount User Manual 7
FCC regulations require that the following information be provided in this manual:
1. This equipment complies with Part 68 of FCC rules. On the back of the
equipment housing is a label showing the FCC registration number and ringer
equivalence number (REN). If requested, provide this information to the
telephone company.
2. If this equipment causes harm to the telephone network, the telephone
company may temporarily discontinue service. If possible, advance
notification is given; otherwise, notification is given as soon as possible. The
telephone company will advise the customer of the right to file a complaint
with the FCC.
3. The telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper operation of this
equipment. Advance notification and the opportunity to maintain
uninterrupted service are given.
4. If experiencing difficulty with this equipment, please contact ADTRAN for
repair and warranty information. The telephone company may require this
equipment to be disconnected from the network until the problem is corrected
or it is certain the equipment is not malfunctioning.
5. This unit contains no user-serviceable parts.
6. An FCC compliant telephone cord with a modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone
network or premises wiring using an FCC compatible modular jack, which is
Part 68 compliant.
7. The following information may be required when applying to the local
telephone company for a leased line facilities:
8. The REN is useful in determining the quantity of devices you may connect to
your telephone line and still have all of those devices ring when your number
is called. In most areas, the sum of the RENs of all devices should not exceed
five. To be certain of the number of devices you may connect to your line as
determined by the REN, call your telephone company to determine the
maximum REN for your calling area.
Service Type
Digital Facility
Interface Code
Service Order
Code
Network
Jacks
1.544 Mbps SF without line power 04DU9-BN 6.0N RJ-48C
1.544 Mbps ANSI ESF without line power 04DU9-DN 6.0N RJ-48C
1.544 Mbps ANSI ESF and B8ZS without line power 04DU9-IKN 6.0N RJ-48C
1.544 Mbps SF and B8ZS without line power 04DU9-ISN 6.0N RJ-48C