SawStop SawStop - Manual (Page 13)

13
If the brake has activated, remove the brake and blade together by “walking” the
blade and brake off the arbor and mounting pins. To “walk” them off, alternately pry the
blade and then the brake out a short distance at a time using a blade wrench.
See Owner’s Manual
? pp.55-56
TO INSTALL THE CARTRIDGE:
4.
Slide the cartridge onto the mounting
5.
Insert the cartridge key with the red
pins until it is fully seated. handle pointing up. Rotate the key
fully 90° counter-clockwise.
6.
Lower the clamping handle fully downward.
.
Check the blade-to-brake spacing -- see page 11.
Key
Cartridge
Mounting
pin
Mounting
pin
Key