SawStop SawStop - Manual (Page 9)


Changing the Riving Knife / Blade Guard
Position the blade guard or riving
knife in the clamp.
Fully lower the clamping handle.
5.
6.
Turn the saw OFF and unplug the
power cord.
Set the blade to 0°, raise it fully
and remove the table insert.
Reach into the table opening and lift
the clamping handle fully upward.
Remove the
riving knife
or blade guard.
1.
.
3.
4.
riving knife
clamping
handle
blade guard
clamping handle
See Owner’s Manual
?
pp.30-31, 42-43