DOCTER DOCTER®comfort 1-4x24 User Manual
Page 12
Commissioning
Inserting Batteries
First, unscrew the battery compartment cap (1). Then, put the lithium battery CR2032
(scope of delivery) on the battery compartment with the positive terminal facing up, be-
fore pressing down in the middle or rather click it in. The lettering of the button cell must
be readable. Afterwards, the battery compartment cap (1) has to be screwed on again to
ensure a reliable electrical contact and the tightness of the battery compartment.
Removing Batteries
First, unscrew the battery compartment cap (1). Now you can remove the button cell by
pressing on the edge of the cell until it clicks and stands out slightly.
Switching the Reticle Illumination On/Off
It is not intended for the reticle illumination to be switched on manually. When the rifle-
scope is in operational position, the illumination is automatically switched on. It automat-
ically switches off when the position angle become smaller or larger than the critical an-
gles as the weapon cants or is put down. As seen in the illustration …, the critical angle
is 45° for lateral canting as well as upward, and 75° downward.
Thus, the device is switched off during the typical vertical storage in a gun safe. Fur-
thermore, the control is battery-conserving when the ambient light is very low, like in a
gun case, even if it is not switched off.