Actiontec electronic R4500U User Manual
Page 25
Advertising
22
Actiontec USB/Ethernet DSL Modem User Manual
Advanced Setup
1.
If “Advanced Setup” was chosen, enter the VPI and VCI settings in their
appropriate boxes (if provided by the DSL service provider). If not provided
with these settings, click the “Use the default VPI/VCI Settings” check box,
then click Next.
2.
The next windodow appears. Select the type of IP address used by the DSL
service provider. Click Next.
3.
The next window appears, and then a prompt requesting the user to restart
the computer will appear. Select Yes.
Advertising