Setting up static ip address – Actiontec electronic R4500U User Manual
Page 68
Advertising
65
Setting Up Static
IP Address
To communicate with the Modem from a computer on the network (to use the
Web Configuration Utility, for example), the user may have to switch the IP
address settings from
DHCP
-enabled to static
IP
, so that the computer and the
Modem are on the same subnet.
To set up static
IP
on a computer, select the operating system and follow the
instructions.
☞
Note: The following procedures are based on the Modem’s fac-
tory default
IP
address. If the Modem’s
IP
address has been
changed, enter the new
IP
address when instructed to enter an
IP
address.
Windows 98 and 98 SE
1.
From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
A
Advertising