Actiontec electronic R4500U - Manual (Page 87)

84
Actiontec USB/Ethernet DSL Modem User Manual
Windows NT 4.0
1. Click Start, Programs, Command Prompt.
2. When the “Command Prompt” window appears, enter:
ipconfig/all
then press Enter on the keyboard.
3 A list of information about the Ethernet adapter appears.
4. Note the “Physical Address,” which is the MAC address of the installed
Ethernet adapter.
Macintosh
1. Select Apple, Control Panels, TCP/IP.
2. In the “TCP/IP” window, click Info.
3. The “TCP/IP Info” window appears. In the “Addresses” section, note the
“Hardware address,” which is the MAC address of the installed Ethernet
adapter.